Actim 1ngeni Bedienungsanleitung Seite 42

Troubleshooting
42
Warning Dialogs
Reset instrument settings to factory
0009 default?
All current settings and data will be lost.
Instrument memory is almost full!
0010
Please export and delete result data.
Instrument memory is full!
0011
{0} is deleted if you wish to proceed.
Delete all test results from the instrument
0013 memory?
This cannot be undone.
Cancel changes?
0014
Changes made will be lost.
Cancel test?
0015
Test data will be lost.
Import list of {0} users?
Imported user list will replace existing
0017
user list.
This cannot be undone.
A remote connection is still active!
0022
Are you sure you wish to cancel?
Save diagnostics substantially increases
0023 memory use!
Do you wish to proceed?
Leaving this page will reset its values.
0025
Are you sure you want to proceed?
0026 Are you sure you wish to proceed?
Cancelling will lose the normalisation
0029 progress made! Are you sure you want to
cancel?
Reset device settings to user default?
0032
All current settings and data will be lost
The instrument requires confirmation from the user hat
they wish to remove all user entered data and patient
results from the instrument by returning the instrument to
factory default.
This dialog notifies the user that the Actim 1ngeni
instrument memory is almost full and needs to clear in
the near future. Attach a USB flash memory key to the
instrument and perform Test Result export and confirm the
request to wipe instrument memory.
This dialog will appear until the memory is cleared or the
memory is full.
This dialog notifies the user that the Actim 1ngeni
instrument memory is full and needs to clear before
further testing can be performed.
If you proceed a result will be deleted from the test
memory to make room for the new test result. This cannot
be undone.
Attach a USB flash memory key to the instrument and
perform Test Result export and confirm the request to
wipe instrument memory.
The instrument requests the user to confirm that the user
would like to delete all test results from the instrument.
This cannot be undone
This is a instrument warning, advising the users that any
changes made on the current GUI screen will be lost by
navigating away without saving changes.
This is a instrument warning, advising the users that
cancelling the current test will lose the current test data.
This cannot be undone.
The instrument informs the user that importing a new user
list will replace the user list on the instrument. Please make
sure this is what you want to do before proceeding with
the import request.
If the Actim 1ngeni instrument has been used in Connected
mode with the Actim 1ngeni Kinetic Software then it may
find the connection still open. To close the connection,
select "OK"; to keep it open select "Cancel".
The Save diagnostics function on the instrument uses more
memory than a standard test result. Only use this function
for troubleshooting purposes. The instrument warns you
before you turn this function on.
This is an Actim Oy factory user item only.
This is a secondary confirmation requesting the user
confirm that they do indeed wish to return the instrument
to factory default.
This is an instrument warning, advising the users that
cancelling the current normalisation progress will lose the
current data. This cannot be undone.
The instrument requires confirmation that the admin user
wishes to reset the instrument to a user default state. This
cannot be undone.