Brightness; About - Actim 1ngeni Bedienungsanleitung

12 Settings

3.4 Brightness

The screen brightness may be adjusted using the up and down arrows.
The default setting is 80%.

3.5 About

The Info screen displays the following information:
Serial Number, Silicon ID, MAC Address, IP Address, Application
Version, Model, Baseboard Hardware Version, Core Hardware Version, Baseboard
Firmware Version, Trayboard Firmware Version, Revision ID, RAM (MB), Test Types
Package, Self Test Calibration Exposure, Instrument Check
A record of these identifying fields can assist in the provision of support
and assistance.
A record of this information can be exported from the instrument using the
"Export Test Results" or the "Export Summary File" and can be found on
the attached USB key in the Instrument Details.csv file.