Troubleshooting - Actim 1ngeni Bedienungsanleitung

Troubleshooting

34
TROUBLESHOOTING
This section provides troubleshooting steps for:
1. In-Test Error Dialogs
2. Warning Dialogs
3. Error Dialogs
4. Information Dialogs
Once the steps listed below are executed, if the error or warning persists, please contact your local distributor.
Warning: The software uses a standard warning screen. A warning screen will be displayed where a user has
made a selection that is not reversible and a confirmation is required.
Error: If the instrument receives a request or performs an action outside of the normal operating
parameters for that user/test/function, an error message will be displayed, explaining what
error has occurred and requiring the user to confirm that the error has been noted before the
instrument returns to normal operation. In some cases it may cancel a current test and/or require
an instrument reboot.
Information: An information screen supplies the user with important information. There are no "OK" or "Cancel"
inputs required from the user, so once the user has finished reading the message "OK" will exit the
screen.