Kubota D650-B Handbuch Seite 224

(2)
C022F075
[AI Adjustment of pinion gap
C022F076
o
Checking and Adjusting Pinion Gap
1) Disconnect the connecting lead from C terminal.
2) Energize the magnet switch and measure the gap between
the pinion tip and the stop collar.
3) To adjust the gap, change the length of the magnet switch
joint to the specified one.
0.1 to
R"l"""nrA
value
0.004
(1) Pinion gap
(2) Pinion juts out to this position
(3) Joint
(4) Turning the joint alters its length
228