o
Checking Cam Heights of Intake and Exhaust
1) Measure the height of the cam at its highest point with a
micrometer.
2) If the measurement exceeds the allowable limit, replace
the camshaft.
[AI
Cam height measuring points
0075F039
(11
Cam height
o
Checking Gear Backlash
1) Install a lever·type indicator between the gear teeth.
2) Clamp one gear, rotate the other and measure the
backlash.
3) If the backlash exceeds the allowable limit, replace.
r - - - -..
~'---
..- -...
~--
...
- - -
0.042 to 0.115 mm
Reference val ue
0.0017 to 0.0045 in.
----1--_._ ..-'
0.2 mm
Allowable limit
0.0079 in.
172