Troubleshooting - SOLIS KITCHEN QUEEN PRO 808 Bedienungsanleitung

▲
T R O U B L E S H O O T I N G
PROBLEM
Machine will not work
when switched "ON".
Cannot set the time on
the count-down timer.
Mixer suddenly switches
off during mixing.
"E1" error message is
flashing on the count-
up/down timer display.
EASY SOLUTION
• Always ensure the control dial is in the "OFF"
position before start.
• The "Thermo cut-off – temperature overload"
protection device has been activated automatical-
ly, allow more time for the motor to cool down.
• Always ensure the control dial is in the "OFF"
position before trying to set the count-down time.
• The mixer has been stressed by overloading or
stalling or the mixer head was raised. The mixer
will automatically activate the overload protection
button and the unit will switch itself off. When
this happens it is recommended that the unit is
switched off at the power outlet and unplugged.
Remove a part of the ingredients and lower the
mixer head to the horizontal position. The safety
devices will then be reset and the appliance is
ready to use again.
• The mixer will automatically stop operation if the
motor is stalled or overloaded. If this occurs, the
"E1" error message will flash on the count-
up/down timer display. This is an electronic safety
feature. This is normally a result of too much
ingredients being processed at one time. Turn the
control dial to the "OFF" position and unplug the
mixer from the power outlet. Try removing some
of the ingredients from the bowl. Then plug the
mixer into power outlet and use as normal.
139