SOLIS KITCHEN QUEEN PRO 808 Bedienungsanleitung Seite 119

ATTACHING THE SCRAPER BEATER, DOUGH HOOK OR WHISK
TO THE MIXER HEAD
1. Choose the suitable mixing attachment. Ensure
the mixer head is in the raised/open position.
Align the groove in the top of the mixing at-
tachment with the locking pin on the spindle
extending down from the mixer head.
Push the attachment upwards and turn clock-
wise until it locks securely onto the locking pin
on the spindle.
2. Lower the mixer head by pressing down the re-
lease button and gently pushing the mixer
head down until it locks into the horizontal
(closed) position.
3. The lid (splash guard) can now be attached.
Slide the main ring into position on top of
bowl, then assemble the feeder tube. Both of
the tabs on the feeder tube align with the
grooves in the lid.
Note: When ingredients are in the mixing bowl, the scraper beater may make some
noise as it scrapes the sides and bottom of the bowl. This is normal and should not
cause concern.
Do not turn the mixer on with the scraper beater in place if the mixing bowl is empty.
This will cause the scraper beater to make a loud noise as it scrapes the bowl.
119