Inhaltsverzeichnis
Werbung
SWINGARM
3. Install:
• Bolt (rear shock absorber - relay arm) 1
• Plain washer
• Nut (rear shock absorber-relay arm)
TIP
Apply the molybdenum disulfide grease on the
bolt (rear shock absorber - relay arm).
4. Install:
• Bolt (connecting arm-frame) 1
• Plain washer
• Nut (connecting arm-frame)
TIP
Apply the molybdenum disulfide grease on the
bolt (connecting arm - frame).
5. Install:
• Drive chain tensioner (lower) 1
• Collar
• Bolt [drive chain tensioner (lower)]
6. Install:
• Bushing 1
• Drive chain tensioner (upper) 2
• Plain washer 3
• Bolt [drive chain tensioner (upper)] 4
TIP
Apply the lithium soap base grease on the
bushing inner surface.
5-64
CHAS
35 Nm (3.5 m · kg, 25 ft · lb)
35 Nm (3.5 m · kg, 25 ft · lb)
7 Nm (0.7 m · kg, 5.1 ft · lb)
23 Nm (2.3 m · kg, 17 ft · lb)
Werbung
Inhaltsverzeichnis
