Inhaltsverzeichnis
Werbung
BRAKE PEDAL HEIGHT ADJUSTMENT/FRONT BRAKE PAD
INSPECTION AND REPLACEMENT (TT-R125LW/TT-R125LWE)
BRAKE PEDAL HEIGHT ADJUSTMENT
1. Check:
• Brake pedal height a
Out of specification → Adjust.
Brake pedal height a:
1 mm (0.04 in)
2. Adjust:
• Brake pedal height
Pedal height adjustment steps:
• Loosen the locknut 1.
• Turn the adjusting bolt 2 until the pedal height
a is within specified height.
• Tighten the locknut.
FRONT BRAKE PAD INSPECTION AND
REPLACEMENT
(TT-R125LW/TT-R125LWE)
1. Remove:
• Plug
2. Inspect:
• Brake pad thickness a
Out of specification → Replace as a set.
Brake pad thickness a:
Standard
4.0 mm
(0.16 in)
3. Replace:
• Brake pad
Brake pad replacement steps:
• Remove the brake caliper support bolt 1.
• Turn the brake caliper 2 counterclock-
wise a.
• Replace the brake pads 3.
3-18
INSP
ADJ
<Limit>
0.8 mm
(0.03 in)
Werbung
Inhaltsverzeichnis
