Inhaltsverzeichnis
Werbung
FUSE INSPECTION (TT-R125E/TT-R125LWE)
3. Replace:
• Blown fuse
Replacement steps:
• Set the main switch to "OFF".
• Install a new fuse of the correct amperage.
• Set on the switches to verify if the electrical
circuit is operational.
• If the fuse immediately blows again, check
the electrical circuit.
Items
Main fuse
WARNING
Never use a fuse with an amperage rating
other than that specified. Improvising or
using a fuse with the wrong amperage rating
may cause extensive damage to the electrical
system, cause the starting and ignition
systems to malfunction and could possibly
cause a fire.
4. Install:
• Battery cover
3-42
INSP
ADJ
Amperage rating
10 A
Qty
1
Werbung
Inhaltsverzeichnis
