REAR WHEEL AND REAR BRAKE
4. Inspect:
• Brake drum inner surface.
Oil/scratches → Remove.
Use a rag soaked in lacquer
Oil
thinner or a solvent.
Use a emery cloth (lightly
Scratches
and evenly polishing).
ASSEMBLY AND INSTALLATION
Brake shoe plate assembly
1. Install:
• Brake camshaft 1
TIP
Apply the lithium soap base grease on the brake
camshaft.
2. Check:
• Brake camshaft operation
Unsmooth operation → Repair.
3. Install:
• Wear indicator plate 1
TIP
When installing the wear indicator plate to the
brake camshaft align the projection a on the
wear indicator plate with the slots b on the brake
camshaft.
4. Install:
• Brake camshaft lever 1
TIP
Install the brake camshaft lever in relation to the
punch mark a as shown.
5-28
CHAS
10 Nm (1.0 m · kg, 7.2 ft · lb)