Inhaltsverzeichnis
Werbung
CDI MAGNETO AND STARTER CLUTCH
(TT-R125E/TT-R125LWE)
REMOVAL POINTS
Rotor
1. Remove:
• Nut (rotor) 1
• Plain washer 2
Use the sheave holder 3.
2. Remove:
• Rotor 1
Use the flywheel puller 2.
EC4L4000
INSPECTION
EC4L4101
CDI magneto
1. Inspect:
• Rotor inner surface a
• Stator outer surface b
Damage → Inspect the crankshaft runout
and crankshaft bearing.
If necessary, replace CDI magneto and/
or stator.
EC4L4200
Woodruff key
1. Inspect:
• Woodruff key 1
Damage → Replace.
Starter clutch
1. Check:
• Starter clutch
Damage/wear → Replace.
2. Check:
• Idle gear
• Starter clutch gear
Pitting/burrs/chips/roughness/wear →
Replace the defective parts.
4-61
ENG
Sheave holder:
YS-1880-A/90890-01701
Flywheel puller:
YU-33270-B/90890-01362
Werbung
Inhaltsverzeichnis
