Yamaha 2009 TT-R125 Wartungs-Handbuch Seite 498

3
2
3
2
2
4
3
4
1
1
1
HANDLEBAR
6. Install:
TT-R125
• Front brake lever holder 1
• Bolts (front brake lever holder) 2
• Front brake cable 3
• Clamp
TIP
Apply the lithium soap base grease on the front
brake cable end.
TT-R125E
• Start switch 1
• Bolts (start switch) 2
• Front brake cable 3
• Clamp
TIP
Apply the lithium soap base grease on the front
brake cable end.
TT-R125LW
• Brake master cylinder 1
• Brake master cylinder bracket 2
• Bolt (brake master cylinder bracket) 3
TIP
• Install the bracket so that the arrow mark a
face upward.
• First tighten the bolts on the upper side of the
brake master cylinder bracket, and then
tighten the bolts on the lower side.
TT-R125LWE
• Start switch 1
• Brake master cylinder 2
• Brake master cylinder bracket 3
• Bolt (brake master cylinder bracket) 4
TIP
• Install the bracket so that the arrow mark a
face upward.
• First tighten the bolts on the upper side of the
brake master cylinder bracket, and then
tighten the bolts on the lower side.
5-50
CHAS
4 Nm (0.4 m · kg, 2.9 ft · lb)
4 Nm (0.4 m · kg, 2.9 ft · lb)
9 Nm (0.9 m · kg, 6.5 ft · lb)
9 Nm (0.9 m · kg, 6.5 ft · lb)