Inhaltsverzeichnis
Werbung
HANDLEBAR
7. Install:
• Engine stop switch 1
• Clutch lever holder 2
• Bolts (TT-R125/TT-R125LW) 3
• Screws (TT-R125E/TT-R125LWE) 3
TIP
• The engine stop switch and clutch lever
holder should be installed according to the
dimensions shown.
• Pass the engine stop switch lead in the middle
of the clutch lever holder.
A TT-R125/TT-R125LW
B TT-R125E/TT-R125LWE
8. Install:
• Clutch cable 1
• Clamp
TIP
Apply the lithium soap base grease on the clutch
cable end.
9. Adjust:
• Brake lever free play
Refer to "FRONT BRAKE ADJUSTMENT"
section in the CHAPTER 3.
• Clutch lever free play
Refer to "CLUTCH ADJUSTMENT"
section in the CHAPTER 3.
5-51
CHAS
4 Nm (0.4 m · kg, 2.9 ft · lb)
Werbung
Inhaltsverzeichnis
