Inhaltsverzeichnis
Werbung
FRONT WHEEL AND FRONT BRAKE
1
(TT-R125/TT-R125E)
a
1
5-5
ASSEMBLY AND INSTALLATION
Brake shoe plate assembly
1. Install:
• Brake camshaft 1
TIP
Apply the lithium soap base grease on the brake
camshaft.
2. Check:
• Brake camshaft operation
Unsmooth operation → Repair.
3. Install:
• Wear indicator plate 1
TIP
When installing the wear indicator plate to the
brake camshaft align the projection a on the
wear indicator plate with the slots b on the brake
camshaft.
4. Install:
• Brake camshaft lever 1
10 Nm (1.0 m · kg, 7.2 ft · lb)
TIP
Install the brake camshaft lever in relation to the
punch mark a as shown.
5. Install:
• Springs 1
New
• Brake shoes 2
TIP
Apply the lithium soap base grease on the pivot
pin.
WARNING
Do not apply grease to the brake shoe
linings.
CHAS
Werbung
Inhaltsverzeichnis
