Inhaltsverzeichnis
Werbung
CDI MAGNETO (TT-R125/TT-R125LW)
REMOVAL POINTS
Rotor
1. Remove:
• Nut (rotor) 1
• Plain washer 2
Use the sheave holder 3.
Sheave holder:
YS-1880-A/90890-01701
2. Remove:
• Rotor 1
Use the flywheel puller 2.
Flywheel puller:
YU-33270-B/90890-01362
EC4L4000
INSPECTION
EC4L4101
CDI magneto
1. Inspect:
• Rotor inner surface a
• Stator outer surface b
Damage → Inspect the crankshaft runout
and crankshaft bearing.
If necessary, replace CDI magneto and/
or stator.
EC4L4200
Woodruff key
1. Inspect:
• Woodruff key 1
Damage → Replace.
EC4L5000
ASSEMBLY AND INSTALLATION
CDI magneto
1. Install:
• Stator 1
• Bolt (stator)
• Lead guide
• Screw (lead guide) 2
• Pickup coil 3
• Bolt (pickup coil)
4-58
ENG
10 Nm (1.0 m · kg, 7.2 ft · lb
7 Nm (0.7 m · kg, 5.1 ft · lb)
10 Nm (1.0 m · kg, 7.2 ft · lb
Werbung
Inhaltsverzeichnis
