Inhaltsverzeichnis
Werbung
ENGINE OIL REPLACEMENT
5. Install:
6. Start the engine and let it warm up for several
7. Turn off the engine and inspect the oil level
TIP
Wait a few minutes until the oil settles before
inspecting the oil level.
ENGINE OIL REPLACEMENT
1. Start the engine and warm it up for several
2. Place the machine on a level place and hold
3. Place a suitable container under the engine.
4. Remove:
5. Install:
6. Fill:
7. Check:
8. Check:
9. Install:
3-9
• Dipstick
minutes.
once again.
minutes and wait for five minute.
it on upright position by placing the suitable
stand under the engine.
• Oil drain bolt 1
• Dipstick 2
Drain the engine oil.
New
• Copper washer
• Oil drain bolt 1
20 Nm (2.0 m · kg, 14 ft · lb)
• Engine oil
Oil capacity:
Periodic oil change:
1.0 L (0.88 Imp qt, 1.06 US qt)
• Oil leakage
• Engine oil level
• Dipstick 2
INSP
ADJ
Werbung
Inhaltsverzeichnis
