Inhaltsverzeichnis
Werbung
TRANSMISSION, SHIFT CAM AND SHIFT FORK
3. Install:
• Plain washer 1
• Circlip 2
TIP
• Be sure the circlip sharp-edged corner a is
positioned opposite side to the plain washer
and gear b.
• Be sure the circlip end c is positioned at
axle spline groove d.
4. Install:
• Push rod 2
On main axle.
TIP
Apply the engine oil on the push rod 2.
5. Install:
• Washer 1
On drive axle.
6. Install:
• Main axle
• Drive axle
Install these in the left crankcase at the
same time.
TIP
• Apply the lithium soap base grease on the oil
seal lip.
• When installing the drive axle into the
crankcase, pay careful attention to the
crankcase oil seal lip.
4-81
ENG
New
Werbung
Inhaltsverzeichnis
