Inhaltsverzeichnis
Werbung
CLUTCH AND PRIMARY DRIVEN GEAR
A
B
EC493000
REMOVAL POINTS
Clutch boss
1. Remove:
• Nut 1
• Lock washer
• Clutch boss 2
TIP
Straighten the lock washer tab and use the clutch
holding tool 3 to hold the clutch boss.
Clutch holding tool:
YM-91042/90890-04086
A For USA and CDN
B Except for USA and CDN
Primary drive gear
1. Remove:
• Nut (primary drive gear) 1
• Primary drive gear 2
TIP
• Place a folded rag or aluminum plate between
the teeth of the primary drive gear and primary
driven gear.
• Take care not to damage the gear teeth.
EC494000
INSPECTION
EC484100
Clutch housing and boss
1. Inspect:
• Clutch housing 1
Cracks/wear/damage → Replace.
• Clutch boss 2
Scoring/wear/damage → Replace.
EC484201
Primary driven gear
1. Check:
• Circumferential play
Free play exists → Replace.
• Gear teeth a
Wear/damage → Replace.
4-42
ENG
Werbung
Inhaltsverzeichnis
