Inhaltsverzeichnis
Werbung
FRONT WHEEL AND FRONT BRAKE
(TT-R125/TT-R125E)
REMOVAL POINTS
EC513201
Wheel bearing (if necessary)
1. Remove:
• Bearing 1
TIP
Remove the bearing using a general bearing
puller 2.
INSPECTION
EC514100
Wheel
1. Measure:
• Wheel runout
Out of limit → Repair/replace.
Wheel runout limit:
Radial 1: 2.0 mm (0.08 in)
Lateral 2: 2.0 mm (0.08 in)
2. Inspect:
• Bearing
Rotate inner race with a finger.
Rough spot/seizure → Replace.
TIP
Replace the bearings, oil seal and wheel collar
as a set.
EC514200
Wheel axle
1. Measure:
• Wheel axle bends
Out of specification → Replace.
Use the dial gauge 1.
Wheel axle bending limit:
0.5 mm (0.020 in)
TIP
The bending value is shown by one half of the
dial gauge reading.
WARNING
Do not attempt to straighten a bent axle.
5-3
CHAS
Werbung
Inhaltsverzeichnis
