Inhaltsverzeichnis
Werbung
CDI MAGNETO (TT-R125/TT-R125LW)
2. Install:
• Woodruff key 1
• Rotor 2
TIP
• Clean the tapered portions of the crankshaft
and rotor.
• When installing the woodruff key, make sure
that its flat surface a is in parallel with the
crankshaft center line b.
• When installing the rotor, align the keyway of
the rotor with the woodruff key.
3. Install:
• Plain washer 1
• Nut (rotor) 2
Use the sheave holder 3.
Sheave holder:
YS-1880-A/90890-01701
4. Install:
• Dowel pin
New
• Gasket
• Left crankcase cover
• Bolt (left crankcase cover)
TIP
Tighten the screws in stage, using a crisscross
pattern.
5. Connect:
• CDI magneto lead
Refer to CABLE ROUTING DIAGRAM
section in the CHAPTER 2.
4-59
ENG
80 Nm (8.0 m · kg, 58 ft · lb)
10 Nm (1.0 m · kg, 7.2 ft · lb)
Werbung
Inhaltsverzeichnis
