Herunterladen Inhalt Inhalt Diese Seite drucken

Assembly And Installation - Yamaha 2009 TT-R125 Wartungs-Handbuch

Inhaltsverzeichnis

Werbung

VALVES AND VALVE SPRINGS
4-30
2. Measure:
• Compressed spring force a
Out of specification → Replace.
b Installed length
Compressed spring force:
Intake:
19.5 ~ 22.3 kgf at 25.6 mm
(42.93 ~ 49.23 lbf at 1.01 in)
Exhaust:
19.5 ~ 22.3 kgf at 25.6 mm
(42.93 ~ 49.23 lbf at 1.01 in)
3. Measure:
• Spring tilt a
Out of specification → Replace.
Spring tilt limit:
Intake:
2.5°/1.7 mm (0.07 in)
Exhaust:
2.5°/1.7 mm (0.07 in)

ASSEMBLY AND INSTALLATION

Valve
1. Apply:
• Molybdenum disulfide oil
(onto the valve stem and valve stem seal)
2. Install:
• Valve spring seats 1
• Valve stem seals 2
• Valves 3
• Valve springs 4
• Valve spring retainers 5
TIP
• Make sure that each valve is installed in its
original place.
• Install the valve springs with the larger pitch
a facing upwards.
b Smaller pitch
ENG
New

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis