Inhaltsverzeichnis
Werbung
FRONT BRAKE ADJUSTMENT
3-16
TIP
If bleeding is difficult, it may be necessary to
let the brake fluid system stabilize for a few
hours. Repeat the bleeding procedure when
the tiny bubbles in the system have
disappeared.
j. Add brake fluid to the level line on the
reservoir.
WARNING
Check the operation of the brake after
bleeding the brake system.
3. Install:
• Diaphragm
• Brake master cylinder cap
FRONT BRAKE ADJUSTMENT
TT-R125/TT-R125E
1. Check:
• Brake lever free play a
Out of specification → Adjust.
Brake lever free play a:
10 ~ 15 mm (0.39 ~ 0.59 in)
2. Adjust:
• Brake lever free play
Brake lever free play adjustment steps:
• Loosen the locknuts 1.
• Turn the locknuts until free play a is within
the specified limits by changing their
tightening position.
• Tighten the locknuts.
TIP
For minute adjustment, loosen the locknut 2 on
the lever side and adjust with the adjuster 3.
NOTICE
Make sure that there is no brake drag after
adjusting the brake lever free play.
INSP
ADJ
Werbung
Inhaltsverzeichnis
