Inhaltsverzeichnis
Werbung
REAR WHEEL AND REAR BRAKE
7. Install:
• Drive chain puller (right) 1
• Plain washer 2
• Axle nut 3
TIP
Temporarily tighten the axle nut at this point.
8. Adjust:
• Drive chain slack a
Drive chain slack:
35 ~ 50 mm (1.4 ~ 2.0 in)
Refer to "DRIVE CHAIN SLACK ADJUST-
MENT" section in the CHAPTER 3.
9. Tighten:
• Axle nut 1
10. Install:
• Spring 1
• Brake rod 2
• Pin 3
• Wing nut 4
On brake camshaft lever 5.
11. Adjust:
• Brake pedal free play
Refer to "REAR BRAKE ADJUST-
MENT" section in the CHAPTER 3.
5-31
CHAS
60 Nm (6.0 m · kg, 43 ft · lb)
Werbung
Inhaltsverzeichnis
