Obligations Of The Operator; Approved Persons - Weber Alpha Entry Originalbetriebsanleitung

Chapter 2 Safety regulations

Obligations of the operator

These operating instructions are a component of the labeler, and must always be kept at
hand.
In order to ensure a safe operation of the labeler, the operator undertakes to ...

make sure that the safety of people working on the labeler is always guaranteed.

that technical data and information regarding the assembly, connection, ambient and
operating conditions are consistently respected.

ensure compliance with the labeler-specific safety regulations.

ensure that the use of personal protective equipment is observed.

ensure that signs or danger notices regarding danger zones are replaced in case of
damage or loss.

ensure that persons who need to be instructed or trainees are under the constant su-
pervision of an experienced person.

ensure that all work on the electrical equipment is only carried out by qualified electri-
cians.

ensure that all faults on the system are eliminated by trained personnel, or by techni-
cians from the Bluhm-Weber-Group.

ensure that the technical personnel is properly trained to operate the integrated control-
ler before parameter settings are carried out.
If you don't understand any part of these operating instructions, please contact your
Bluhm-Weber contact person immediately.

Approved persons

In these operating instructions, approved persons refer to the following persons:
Operators are people who

have been instructed on how to operate the labeler

have reached the legally required minimum age limit.

have read and understood the operating instructions.
Operators are authorized to

start or stop labeling mode.

to renew labels or colour ribbons.

perform daily incidental cleaning work in accordance with the "Maintenance/Repair"
chapter.
Technical personnel are operators who

have completed a technical training (electrical technician, mechanic).

have successfully completed a training course of the Bluhm-Weber Group.
Technical personnel are entitled to

perform repair and maintenance work on the labeler and its components.
Version: 23.04.2018
Page 17 of 76
40059377 BTA Alpha Entry
ML-GB
DE
GB
FR
ES
RU