Maintenance/Repair; Safety Instructions - Weber Alpha Entry Originalbetriebsanleitung

Chapter 8 Maintenance/Repair
8.

Maintenance/Repair

Safety instructions

Version: 23.04.2018
Danger posed by direct or indirect contact with live parts
DANGER TO LIFE!
̶ Disconnect the labeler from the mains voltage before carrying
out work on the device.
Risk from residual energy in pneumatic components.
Whipping compressed air hoses, discharged parts or uncon-
trolled moving parts can cause injuries.
̶ Disconnect the labeler from the compressed air supply before
carrying out work on the device
Health hazard due to improper handling of lubricants and
cleaning agents.
HEALTH HAZARD!
Improper handling can lead to health hazards.
̶ It is necessary to observe and comply with the respective
product information on the applicable safety data sheets from
the manufacturers of the utilized lubricants and cleaning
agents, as well as their safety and disposal regulations.
Damage to machine and machine parts
Missed or incorrectly performed maintenance/servicing and re-
pair work will reduce the operational availability of the machine.
This can result in consequential damages and the exclusion of
warranty claims.
Machine functions are to be monitored continuously.
Exceptional noise developments or unusual movements (such
as jerking, hitting, etc.) are indications of malfunctions and must
be checked.
̶ All recognized defects must be resolved promptly and profes-
sionally.
̶ It is prohibited to operate the machine until a proper functional
state has been restored - especially if the protection devices
are defective.
̶ The maintenance/repair of the labeler may only be performed
by technical personnel. Only cleaning work may be performed
by the operator (see page 17 for authorized persons).
Page 67 of 76
40059377 BTA Alpha Entry
ML-GB
DE
GB
FR
ES
RU