Chapter 7 Operation
LABEL PITCH CM (LABEL LENGTH)
DE
DE
Automated calibration of the label length (see Page 41), as well as direct entry of the label
length value are possible here. The adjustment range is 0-255.9 cm/min.
GB
FR
FR
NL
LABEL POS. (LABEL POSITION)
The label position is an offset value that ensures that the label stops flush at the peel bar.
This value is automatically determined with the calibration function (see Page 41). The value
can be adapted or directly specified here.
IT
ES
RU
Spare
parts
Version: 23.04.2018
Press [Enter] to edit the configuration parameter (for password prompt, see page 56).
Afterwards, press the [] or [] *buttons to increase / decrease the value of the
parameter.
To store the value or to change decimal place, please press [Enter].
Press the [] or [] buttons to go to the next configuration parameter.
To exit configuration selection, please press [Start] or [Stop] respectively.
Press [Enter] to edit the configuration parameter (with password prompt, see page 56).
Afterwards, press the [] or [] *buttons to increase / decrease the value of the
parameter.
To store the value or to change decimal place, please press [Enter].
Press the [] or [] buttons to go to the next configuration parameter.
To exit configuration selection, please press [Start] or [Stop] respectively.
*Fast forward function when the [] or [] button is held down.
Page 58 of 76
40059377 BTA Alpha Entry
ML-GB