Display Setting (Lcd Setting); Lcd Contrast - Weber Alpha Entry Originalbetriebsanleitung

Chapter 7 Operation

DISPLAY SETTING (LCD SETTING)

DE DE
This sub-menu contains the display settings. The operator language, display brightness and
contrast can be changed here. The following languages are available, depending on the
language pack:
Language Pack 1 (22800870): English, German, Italian, French, Dutch, Norwegian, Swedish,
Turkish
Language Pack 2 (22800871): English, Greek, Russian, Czech, Latvian, Polish, Spanish,
GB
Portuguese
FR FR



The DISPLAY SETTING parameters:
NL
- LCD BACKLIGHT >> brightness of the background lighting

- LCD CONTRAST

IT
[]
[]
ES





RU
Spare
parts
Version: 23.04.2018
Press the [] or [] * buttons to switch to the next parameter.
Press [Enter] to open the LCD settings (see below for more details).
To exit the parameter settings please press [Start] or [Stop] respectively.
>>
Press the [] or [] buttons to switch to the next display setting.
Press [Enter] to enable the parameter alteration.
During the language selection, the setting is changed directly with [Enter].
For the parameter values, press the [] or [] * buttons to increase / decrease the val-
ue to be edited (the respective cursor will blink).
To store the value, please press [Enter].
Setting value between 001-040.
Contrast setting between 001-100
*Fast forward function when the [] or [] button is held down.
Page 52 of 76
40059377 BTA Alpha Entry
ML-GB