Operation Using The Hmi Panel - Weber Alpha Entry Originalbetriebsanleitung

Chapter 7 Operation

Operation using the HMI panel

DE DE
GB
FR FR
No
.
NL
1
2
3
4
IT
5
6
ES
7
8
RU
9
Spare
7+8
parts
Version: 23.04.2018
Designations
m/min potentiometer
Adjust potentiometer
Run LED
Status LED
Stop LED
+
The HMI panel (see left) offers the fol-
lowing functions.
Fig. 7-2: HMI panel
Description
Used to set the application speed.
Used to adjust the label position.
Lights up green when the machine is "ready for labeling".
Lights up orange when the button lock for the [m/min] and
[Adjust] potentiometers is activated.
Lights up red when "labeling readiness" is interrupted.
Used to start the labeler. Pressing the button activates la-
beling mode and acknowledges any pending error messag-
es.
Hazards from moving parts.
Used to advance a label.
Hazards from moving parts.
Used to calibrate the labeler. During this process, 3 labels
are advanced and must then be removed manually.
Used to stop labeling mode. After actuating the button, the
labeler will switch to the stand-by mode.
Pressing the [Feed] and [Cal] buttons simultaneously (when
machine is ready for labeling) activates or deactivates a
button lock for the [m/min] and [Adjust] potentiometers.
Page 46 of 76
40059377 BTA Alpha Entry
ML-GB