Queue; Labels Burst (Labels Per Trigger) - Weber Alpha Entry Originalbetriebsanleitung

Chapter 7 Operation

QUEUE

DE DE
The parameter is used as a skip function. The labeler is therefore able to compensate for
missing labels by shifting the "gap" to the next label forwards. The value "001" defines how
many "gaps" (missing labels) should be skipped without generating a fault.
GB


FR FR


LABELS BURST (LABELS PER TRIGGER)

NL
The number of labels applied per trigger signal is set here. A value from "0 - 255" can be en-
tered. If the parameter "000" is set, no labels are applied.
If the value is between "001" and "100", the labels are applied at an equal distance. This dis-
tance is set using the parameter "TRIGGER BLANK".
If the value is between "101" and "110", 1 to 10 labels are applied at different distances. The
distances between the individual labels are set by programming #088 to #105.
IT

ES


RU
Spare
parts
Version: 23.04.2018
Press [Enter] to edit the configuration parameter (for password prompt, see page 56).

Afterwards, press the buttons [] or [] to increase / decrease the value of the pa-
rameter.

To store the value, please press [Enter].
Press the [] or [] buttons to go to the next configuration parameter.
To exit configuration selection, please press [Start] or [Stop] respectively.
Press [Enter] to edit the configuration parameter (for password prompt, see page 56).

Afterwards, press the buttons [] or [] to increase / decrease the value of the pa-
rameter.

To store the value, please press [Enter].
Press the [] or [] buttons to go to the next configuration parameter.
To exit configuration selection, please press [Start] or [Stop] respectively.
*Fast forward function when the [] or [] button is held down.
Page 60 of 76
40059377 BTA Alpha Entry
ML-GB