Notes Regarding The Operating Instructions - Weber Alpha Entry Originalbetriebsanleitung

Chapter 1 General
The operating instructions are valid for the system referred to in the title with the type number
specified.
The operating instructions must be accessible at all times where the system is being used
and must be read and observed accordingly by persons who are tasked with working on the
system.
Printing errors, mistakes and changes in accordance with the latest technological develop-
ments are reserved. For clarification, illustrations can be shown without protective devices.

Notes regarding the operating instructions

In the following, you will find a detailed explanation of the writing and representation styles
used in this Service Manual.

Buttons and switches that need to be actuated are shown in square brackets.
Example: Press the [Start] button to apply the change...

Work sequences that must be followed are numbered.
Step
1

Special information is written in bold and/or with a grey background.
This is an example of special information!

All illustrations (Fig.) are numbered consecutively for each chapter. This means that a
reference to "Fig. 2-1" is equivalent to the 1. Illustration in Chapter 2.

Illustrations are often reduced to show the essentials, and can therefore differ from the
original. The only reason that covers or protective devices are not shown in illustrations
is to promote better understanding.

To address a broad range of variants, it is possible that example or principle figures
can strongly differ from the original or not apply at all.

Illustrations are sometimes confined to the depiction of a single version (e.g. only RH
or only LH...), especially when the information content can be appropriately applied to
other versions.
Version: 23.04.2018
Approach
Disconnect the mains plug...
Page 5 of 76
40059377 BTA Alpha Entry
ML-GB
DE
GB
FR
ES
RU