Installation And Initial Commissioning; Safety Instructions - Weber Alpha Entry Originalbetriebsanleitung

Chapter 6 Installation and initial commissioning
DE DE
6.

Installation and initial commissioning

Safety instructions

GB
FR FR
NL
IT
ES
RU
Spare
parts
Version: 23.04.2018
Danger through direct or indirect contact with live parts.
DANGER TO LIFE!
Personnel can be killed by coming into contact with parts which
have become live as a result of faults.
̶ Pull the mains plug before working on the labeler.
Danger from highly flammable label stock.
FIRE HAZARD!
Foil and label stock are highly flammable. Risk of injury from fire
and smoke.
̶ Keep away from ignition sources and open flames.
Hazards from moving parts.
RISK OF INJURY!
Entanglement and risk of being crushed through pneumatically
or mechanically-powered labeler components.
Movements or rotations can start suddenly and abruptly in label-
ing mode.
̶ Do not reach into, towards or between moving parts.
Risk from residual energy in pneumatic components.
RISK OF INJURY!
Whipping compressed air hoses, discharged parts or uncon-
trolled moving parts can cause injuries.
̶ Before creating the compressed air connection, check all
pneumatic connections for tightness and firmly attach them if
necessary.
̶ The pneumatic system slated for maintenance must be vent-
ed before the dismantling of the pneumatic components is
performed.
Risk of tripping through connection cables.
RISK OF INJURY!
Connecting cables for power, compressed air, as well as data
and signal lines are potential tripping hazards and can cause
serious injuries.
̶ Relieve the stress from the connecting cables and route in
such a manner that no danger zones can develop.
Page 26 of 76
40059377 BTA Alpha Entry
ML-GB