Inhaltsverzeichnis
Werbung
STARTER MOTOR
REMOVING THE PINION
Remove:
• Clip 1
NOTE:
Using a pry-bar, pry off the clip.
CHECKING THE PINION
1. Check:
• Pinion teeth
Wear/damage
2. Check:
• Clutch movement
Damage
NOTE:
Rotate the pinion clockwise, and check that it
is free. Also try to rotate the pinion
counterclockwise and confirm that it locks.
CHECKING THE ARMATURE
1. Check:
• Commutator
Dirty
Clean with #600 abrasive paper.
2. Measure:
• Commutator diameter
Out of specification
Commutator diameter limit:
29.0 mm (1.14 in)
8-19
Replace.
Replace.
Replace
E
Werbung
Kapitel
Inhaltsverzeichnis
