Yamaha E60HMHD Wartungshandbuch Seite 432

ELECTRICAL COMPONENTS ANALYSIS
ELECTRICAL COMPONENTS
ANALYSIS
DIGITAL CIRCUIT TESTER
Digital tester
YU-34899-A/90890-06752
NOTE:



" — " indicates a continuity of electricity
which means a closed circuit at the
respective switch position.
MEASURING THE PEAK VOLTAGE
WARNING
When checking the peak voltage do not
touch any of the connections of the digital
tester lead wires
NOTE:
• When checking the condition of the ignition
system it is useful to know the peak
voltage.
• Cranking speed is dependant on many
factors (e.g., fouled or weak spark plugs, a
weak battery). If one of three is defective,
the peak voltage will be lower than
specification.
• If the peak voltage measurement is not
within specification the engine will not
operate properly.
PEAK VOLTAGE ADAPTOR
NOTE:
The peak voltage adaptor should be with the
digital circuit tester.
Peak voltage adaptor
YU-39991/90890-03172
8-4
E