Alpinestars Tech-Air 5 PLASMA System Bedienungsanleitung Seite 66

• When shipped by air or by road, the System must be turned off and put into Shipping
Mode, as reported in Section 16.
• Prior to each use, the System should be inspected for any signs of wear or damage.
Additionally, when turned on, the LED Display (3) must be checked. In the event of a System
Fault (denoted by the System Status LED (3b) showing a red LED or the absence of any
indicators), Users should stop using the System immediately and refer to the User manual.
• Prior to each use, the Activation Zip (2) has to be properly closed when the System is worn
and the System Status LED (3b) light has to be blue. Before each ride, always be sure to
check that the Airbag Control Unit (5) is tightly closed.
• Whenever the LED Display (3) gives a low battery indication, the System MUST be
recharged as soon as possible.
• The System must never be machine washed, submerged in water, tumble dried or ironed,
or dry cleaned, except for the sole washable components as described in Section 15.
• After the deployment, the System must be returned to the Alpinestars' Tech-Air Dealer
®
or Service Center which can arrange for the System to be recharged. Gas Inflators (9) can
be replaced ONLY by Users that are located in the countries authorized for Gas Inflators
(9) handling and replacement. For the complete list of the authorized countries, see the
Documents Section in the Tech-Air App.
®
• Even if the System has not been used, or the Airbag (11) has never fired, it is important
that the System be serviced at least once every two years or 500 hours of functioning,
whichever comes first. This can be arranged through an Alpinestars' Tech-Air Dealer or
®
directly by an Alpinestars' Tech-Air Service Center.
®
• Without any additional notice, Alpinestars reserves all rights to, from time to time, update
the software and/or the electronic components of the System. Accordingly, it is important
that Users register their System and pair it within the Tech-Air App to be able to receive
®
important software updates, and to receive instant notifications/push messages about the
availability and releases of new software updates. Users must always ensure via the App
that the System is running the most up-to-date software available. On first purchase of
the System, check that your System has the latest software installed. Simply access the
Tech-Air App, go to Settings/Software, and ensure the System is running the latest version
®
of the software. For more information and User Instructions, see the Settings/Documents
areas in the App.
68 EN