Alpinestars Tech-Air 5 PLASMA System Bedienungsanleitung Seite 42

2. Reinsert the Airbag and Attach the Back-Protector (4) - Reinsert the Airbag (11) and
then proceed to attach the Back Protector (4) to the Base Layer (1), taking care to correctly
attach the Velcro parts on the upper side of the protector to the Base Layer (1) as shown
in Figure 27.
Reference
Figure 27: Attach the Back Protector (4)
3. Attach the Airbag (11) - Proceed to close all 12 Connection Loops that attach the Airbag
(11) to the Base Layer (1), making sure to match the colored labels on the Airbag (11) to the
colored labels on the Base Layer (1), use the two openings inside the garment to access the
Connection Loops on the front area. Make sure to follow the numbering on the labels to
facilitate the reassembly of the System, as shown in Figure 27. In addition, check to make
sure that the Airbag (11) is well positioned within the System and ensure that there are
no folds in the Airbag (11) or twisting of the Airbag (11), especially in the shoulder areas.
Double check that all 12 connection loops are positioned correctly and securely attached
to the Base Layer (1).
44 EN