Turning Off The System - Alpinestars Tech-Air 5 Plasma System Bedienungsanleitung

6.2 Riding Mode Selection
As previously stated, the System offers three possible Riding Modes: Street Mode, Race
Mode and Off-Road Mode. After the System has been correctly switched on, the User can
easily switch between the three different Riding Modes by pressing the Display Button (3a)
for 2 seconds (Figure 10). A SOLID GREEN LED will appear on the Riding Mode LED (3c)
indicating the Riding Mode that is currently running on the System. A short vibration of
approximately (~1 second) will also be felt in the vicinity of the Activation Zip (2) indicating
the change of the Riding Mode.
WARNING! The STREET MODE is the DEFAULT Riding Mode. Therefore, upon first
activation or after any System Software update, the Street Mode will
be the Riding Mode in use on the System. In all other cases, when
the System turns on, the System will run the LAST SELECTED Riding
Mode.
2 seconds
vibration
1 second
Figure 10: Press the Display Button (3a) for 2 Seconds to Change the Riding Mode.

6.3 Turning Off the System

The User can easily turn the System off by opening the Activation Zip (2). The System
will automatically shut down approximately 1 second after unzipping the Activation Zip (2)
(Figure 11).
Alternatively, the User can manually turn off the System by pressing the Display Button
(3a) for approximately 5 seconds (Figure 12). A long vibration, lasting (~3 seconds) of the
System will also be felt in the vicinity of the Activation Zip (2) confirming that the System
is no longer activated.
The User can check that the System is switched off by checking that all available lights on
the LED Display (3) are turned off.
To keep the System turned off, make sure the Activation Zip (2) remains open and unzipped
as shown in Figure 11.
23 EN
vibration