WARNING!
ALWAYS be sure to turn the System off by unzipping (opening)
the Activation Zip (2) or by pressing the Display Button (3a) for 5
seconds when the User is not riding a motorcycle, and even if the
User continues to wear the System. Although the System has been
evaluated for a variety of non-riding activities, keeping the System
turned on and/or active increases the possibility of an unwanted
deployment and drains the battery. As a rule, when not riding, be
sure to always open the Activation Zip (2).
WARNING!
When the System is being stored, transported, or shipped, the User
MUST follow the instructions reported in Section 15, "Cleaning,
Storage and Transportation."
IMPORTANT!
Even if turned on, the System will automatically turn off if the System:
- remains motionless
- is in use in a position that is inappropriate to the normal wear utilization of the System
- detects a lack of activity of the System for more than 10 minutes.
The above will not occur should the User be wearing the System, as the System detects
normal wearing movements.
Instead, the automatic turning off of the System occurs if the System is not being worn by
the User, but the User has failed to switch the System off and/or the System is stored, or
if the System is positioned inappropriately, for example placed horizontally, or hung up or
placed upside down.
When the above occurs, the System must be restarted by the User by opening and re-
closing the Activation Zip (2).
7. Battery Charging
The System is supplied with a Type C USB Charging Cable (7). To charge the System, the
User must connect the standard Type C USB Charging Cable (7) supplied with the System
to the Type C USB Charging Port (3e) present on the LED Display (3). Once on charge, the
LED Display (3) will show different blinking colors in the Battery Level LED (3d) as shown in
Figure 13, according to the description provided in Section 8, "LED Display (3) Indications
Summary." Fully charge the System before its first use.
25 EN