Alpinestars Tech-Air 5 PLASMA System Bedienungsanleitung Seite 4

Legend for the Tech-Air
The following four words and icons are used in this User Manual to provide various warnings,
important information and tips about the Airbag System:
WARNING! Provides critical information which, if not followed, may cause injury,
death, System malfunction or non-function, and/or an exaggerated
expectation of the Tech-Air
IMPORTANT! Provides important information regarding the limitations of the System.
Tip: Provides useful advice regarding the Tech-Air
Provides information related to the Tech-Air
IMPORTANT!
PLEASE READ BEFORE FIRST USE
The Tech-Air 5 PLASMA (hereinafter referred to as the "System") is shipped with its Shipping
®
Mode activated (with the Shipping Mode Switch (8) in the "OFF" position). Before using the
System for the first time, please ensure the battery is connected to the Electronic Control
Unit by following these instructions:
Figure 1 (Showing how to active the system for the first time, showing shipping mode switch) a) Remove the rear cover of the Airbag Control Unit (5).
b) With the cover removed, locate the Shipping Mode Switch (8). Slide the tab all the way
down into the "ON" position.
c) Next, close the rear cover of the Airbag Control Unit (5) and follow the instructions Figure 1 (Showing how to active the system for the first time, showing shipping mode switch)
Figure 1 (Showing how to active the system for the first time, showing shipping mode switch)
reported in Section 6, "System Operation."
System Manual
®
System's abilities.
®
App optional functionalities.
®
System.
®
6 EN