IMPORTANT!
The SOLID BLUE light on the System Status LED (3b) indicates that the
System is ON and is working properly.
WARNING!
The SOLID YELLOW light on the System Status LED (3b) indicates
that the System has reached the maximum number of inflations
guaranteed for the Airbag (11) in use and that the System should
mandatorily undergo a full service by an authorized Alpinestars
Service Center as soon as possible. In this condition, the System is
active and will accordingly deploy in a crash. However, Alpinestars
reserves the right not to guarantee either the total or partial
performances of the System reported in the User Manual and
therefore, the use of the System in this condition is at the User's
own risk and responsibility.
WARNING!
The solid RED LED light on the System Status LED (3b) indicates that
the System is NOT active and accordingly will NOT deploy in a crash.
DO NOT USE THE AIRBAG SYSTEM with a SOLID RED light on the
System Status LED (3b), as it will not be able to function or protect
the User in a crash situation.
8.2 LED Indications During Battery Recharge
When the System is charging, the Battery Level LED (3d) will show continuous blinking as
indicated in the diagram below. When the battery is fully charged, the Battery Level LED
(3d) will remain illuminated.
Under 20%
BLINKING RED LIGHT
Figure 15: LED Display (3) Indications During Battery Recharge
From 20% to 50%
BLINKING YELLOW LIGHT
From 50% to 80%
BLINKING GREEN LIGHT
Above 90%
SOLID GREEN LIGHT
28 EN