Alpinestars Tech-Air 5 PLASMA System Bedienungsanleitung Seite 20

1 . LED Check
vibration
3 seconds
User may NOT use the System.
Figure 9: System is Performing both the LEDs Check and the Status Check
WARNING! The User MUST ALWAYS check the LED Display (3) after the LEDs
Check to confirm that the System Status LED (3b) is SOLID BLUE
before starting to ride/use the System. The System will NOT deploy if
the System Status LED (3b) is NOT solid blue.
IMPORTANT! For any other LED indications, refer to Section 8, "LED Display (3) Indications
Summary."
Tip: If the System does not switch on (i.e. if there are no LEDs showing on
the LED Display [3]), check that the Activation Zip (2) has been correctly
closed. In addition, check that the System has a sufficient charge. If the
problem persists, contact Tech-Air
Support").
The battery and the status of the System can also be checked by connecting
the System to the Tech-Air
2 . System Status Check
SYSTEM FAULT
App.
®
vibration
1 second
SYSTEM ACTIVE
User may now use the System.
Support (see Section 20, "Tech-Air
®
vibration
®
22 EN