Tech-Air ® Support; Certification Information - Alpinestars Tech-Air 5 Plasma System Bedienungsanleitung

20. Tech-Air
®
If users have any questions or require further information, they can contact the Tech-Air
Dealer where the System was purchased or reach out to Alpinestars directly:
E-mail: techairsupport@alpinestars.com
Tel: +39 0423 5286 (ask for Tech-Air

21. Certification Information

The Tech-Air 5 PLASMA System is manufactured by:
®
Alpinestars S.p.A
5, Viale E. Fermi
Asolo (TV) 31011 Italy
And it is covered by a number of certifications.
Personal Protective Equipment
The Tech-Air 5 PLASMA System – ABS5P25 and all the included protective parts are
®
classified as Category II certified PPE (Personal Protective Equipment) under European
Regulation (UE) 2016/425. This product is in compliance with the corresponding UK
legislation (Regulation 2016/425).
The EU examination was conducted by:
Notified Body #2008 CERTOTTICA S.C.R.L. Z.I. Villanova 32013 - Longarone (BL) Italy
For each PPE included in the Tech-Air
bodies and certifications information contained in the product markings are reported in
Annex I of this manual.
EU Declaration of Conformity & UKCA Declaration of Conformity
The EU Declaration of Conformity of this PPE can be downloaded at:
eudeclaration.alpinestars.com
The UK Declaration of Conformity of this PPE can be downloaded at:
ukdeclaration.alpinestars.com
Protective Garments for Motorcycle Riders
The degree of risk or hazard that a motorcyclist will face is closely linked to the type of
riding and the nature of the accident. Riders are cautioned to carefully choose motorcyclists'
protective garments that match their riding activity and risks. Other garments or garment
combinations certified according to the EN 17092:2020 series of standards may provide
more appropriate protection than this garment but there may be weight or ergonomic or
Support
Support)
®
5 PLASMA System – ABS5P25 and itself, the notified
®
®
54 EN