Alpinestars Tech-Air 5 PLASMA System Bedienungsanleitung Seite 34

In case of any doubt, follow the procedure described below to check if your outer garment
is compatible with the System. Remember to ensure that you select an outer garment that
has the proper fit and should any protectors be present on such outer garment, that the
protectors are correctly positioned. If the outer garment you have chosen is made of leather
or any different, non-stretchable material, it must have stretch panels to accommodate the
inflated Airbag (11) after deployment; if it does not have stretch panels then you should NOT
wear it and instead choose another garment that fits the criteria and will be able to expand
to accommodate the inflation of the Airbag (11) in the event of a deployment. Upon
inflation, the System Airbag (11) covers shoulders, chest, and full back areas, accordingly,
the System must not be used inside a protective garment, if such garment has insufficient
space to accommodate the inflation of the Airbag (11), in order to prevent discomfort in
case of deployment. The guidelines on how to check if your outer garment is compatible
with the System are indicated below.
IMPORTANT! The System shall be worn with any outer garment that meets the following
criteria: measure the circumference of the chest (A) and the garment width
on the chest region (B). The garment is compatible with the System if B is
greater than A divided by 2 plus 16 cm (B > 0.5 x A + 16 cm or B > 0.5 x A
+ 6,30 in) (Figure 22).
Figure 22: References for the Chest Circumference (A) and the Garment Chest Width (B) Measurements
A
B
36 EN