Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7.6 Object 1010h: Store Parameters
This object supports the saving of parameters in non-volatile memory (EEPROM).
Changed parameters are accepted only if the storage command is executed! The
storage command is performed if the signature "save" is written to subindex 1.
Index
Name
Object code
Data type
Category
PDO mapping
Sub-Index
0
1
By read access the device provides information about its saving capability.
Bit 0 = 1, the device saves parameters only on command. That means, if parameters
have been changed by the user and no "Store Parameter Command" had been
executed, at the next power on, the parameters will have their old values.
Bits
Value
In case of write access the device stores the parameters to the non-volatile memory.
This procedure takes approx. 1s. In this time the measuring system isn't accessible at
the bus.
In order to avoid storage of parameters by mistake, storage is only executed when a
specific signature is written to the object. The signature is "save".
MSB
Printed in the Federal Republic of Germany
06/20/2017
0x1010
Store parameters
ARRAY
UNSIGNED32
Optional
No
Description
Number of entries
Accept and store
parameters
MSB
e
65h
76h
TR - ECE - BA - DGB - 0127 - 04
Value
1
write: 65766173h
read: 1
31-2
= 0
v
a
61h
Data type
Access
UNSIGNED8
ro
UNSIGNED32
rw
1
0
s
73h
TR-Electronic GmbH 2016, All Rights Reserved
Page 95 of 143
LSB
0
1
LSB
Werbung
