Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Net Run - LED
Color
OFF
Blinking
Single Flash
ON
Flickering
Net Err - LED
Color
ON
Double Flash
Single Flash
Blinking
Flickering
For appropriate measures in case of error see chapter "Optical displays" page 140.
6 Operating Modes
Two operating modes are supported by the measuring system:
●
Synchronous
●
Distributed Clocks
In the "Synchronous" operating mode, the process data of the incoming EtherCAT
telegram are synchronized with the application using the respective Sync Manager.
In the "Distributed Clocks" operating mode, the process data are output
synchronously to the so called SYNC-Signals of the Distributed-Clocks-Unit. The
relevant settings are performed in the EtherCAT master. By the measuring system the
synchronization signals "SYNC0" and "SYNC1" are supported.
Printed in the Federal Republic of Germany
06/20/2017
EtherCAT State Machine
green
The device is in state INIT
The device is in state PRE-OPERATIONAL
The device is in state SAFE-OPERATIONAL
The device is in state OPERATIONAL
The device is booting and has not yet entered the INIT state
Measuring-System - Error
red
Communication or application error
Watchdog Timeout
Local Error
Invalid Configuration
Booting Error
TR - ECE - BA - DGB - 0127 - 04
TR-Electronic GmbH 2016, All Rights Reserved
Page 91 of 143
Werbung
