eta Duplica Vital plus Bedienungsanleitung Seite 53

- For remaining programs (except for 12–PEČENÍ (BAKING) and 14–KVAŠENÍ
(FERMENTATION) it is used for setting of delayed start. Maximum delayed start time is
13 hours. The setup time will be added to the preparation time, i.e. the display will show
time required for the program to run.
– The button is used to display the temperature set for programme 14–KVAŠENÍ
(FERMENTATION) that is running. When you press the button again, information about
the time that has elapsed is shown on the display.
Example:
It is 20:30 and the bread has to be finished at 7:00 in the morning, i.e. in 10 hours and 30
minutes. Press and hold the ČAS (TIME) button until 10:30 is shown on the display
(i.e. time between now (20:30) and the bread finish time). Confirm setting with the START/
STOP button. The time can be set in 5-minute increments.
Attention
- The timer function (i.e. the delayed start) should be used only for recipes already
successfully tried; do not change the recipes for future breads.
- Excessive amount of dough may overflow and bake on heating element.
- When adding the ingredients in the pan, first pour liquids, then add flour and finally
add dried yeast. Before turning the program on, the yeast may not contact the liquid,
otherwise rising would start prematurely and the dough or bread would collapse later
during baking.
- When working with the time function, do not use perishable ingredients such as milk,
eggs, fruits, yoghurt, cheese, onion etc. as they could be spoiled!
- Use the bread maker in rooms heated to more than 18 °C. Yeast is effective at about
17 °C and more only. If you place the appliance to a cooler room, good dough rising
would not be guaranteed.
- The acoustic signal (beeping) signalling adding of ingredients and completion of the
program may not be turned off; it will sound at night as well.
PAUZA (PAUSE) button
- The button is used for termination of bread maker activity (e.g. for easier addition of
ingredients, removal of kneading blades from dough). Pressing the PAUZA button for
3 seconds operation of the bread baker will terminate (remaining time for the program
will flash on the display) but the setup will be stored in the memory. Press the PAUZA
(PAUSE) button again to restart the operation.
- The button is used for selection of the program required (downwards).
Warning
We recommend interrupting the program for max 5 minutes. If you terminate the program
for longer time, dough rising and the baking result may be deteriorated. When the PAUZA
(PAUSE) function is activated (the display flashes), the START/STOP button is disabled
and the program may not be terminated.
SVĚTLO (LIGHT) button
The button is used for illumination of the baking space. You can check condition of the
dough or of bread at any time without necessity of opening the appliance. The baking
space is not illuminated all long the program runs. To check the dough in regular intervals,
just press the SVĚTLO (LIGHT) button to turn on the light. After one minute or after the
next button press, the light will turn off.
/ 213
53
GB