Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Recording
(Fig. 9.1)
Before starting recording, select a folder between Folder to
Folder .These five folders can be selectively used to distinguish
the kind of recording; for example, Folder might be used to store
private information, while Folder might be dedicated to holding
business information. Newly recorded audio will be saved as the last
file in the selected folder.
1. Press the FOLDER button to choose a
folder in which to make a recording. Every
time the FOLDER button is pressed, folders
will switch.
Current folder
2. Press the REC button to start recording.
The record/play indicator light glows red.
Turn the built-in stereo microphone in
the direction to be recorded. The display
changes depending on the recording mode
( + P. 24).
Current recording mode,
Recording elapsed time,
Memory remaining indicator (E/F bar)
(the bar indicates remaining memory),
Level meter (varies according to the
sound volume being recorded)
Every time the OK button is pressed while
recording, "Recording elapsed time" and
"Remaining recording time" cycles in the
location indicated by .
3. Press the STOP button to stop recording.
Notes
• To ensure recording from the beginning, start speaking after you see
the red record/play indicator light on.
• A beep will sound when remaining recording time reaches 60
seconds, 30 seconds, and 10 seconds while recording.
• When remaining recording time is less than 60 seconds, the record/
play indicator light starts flashing in red. When the recording time is
decreasing to 30 or 10 seconds, the light flashes faster.
• "Memory Full" or "Folder Full" will be displayed when the memory or
folder capacity is full. Delete any unnecessary files before recording
any further (+ P. 72).
• If the REC button is pressed while the mode switch is set to MUSIC,
"Music Mode" will flash on the screen. Set the mode switch to VOICE
before recording (+ P. 14).
Pause (Fig. 9.2)
Press the REC button while recording.
➥ "Rec Pause" will flash on the display.
• The recorder will time out after 1 hour when left
in "Rec Pause".
Resume Recording
Press the REC button again.
➥ Recording will resume at the point of
interruption.
Listening While Audio is Recorded (Fig. 9.3)
If you start recording after inserting the earphone into the EAR jack
on the recorder, you can hear the sound being recorded. The sound
volume on the recording monitor can be adjusted by pressing the
VOL (+) or VOL (–) button.
To EAR (earphone) jack
Connect the earphone to the EAR jack on the recorder.
➥ After recording has started, you can hear the sound being
01 /11
9
a
WS330001.WMA/ 5
WS330002.WMA
WS330003.WMA
Notes
WS330004.WMA
• Recording level cannot be controlled using the volume button.
• When using the earphones, do NOT set the volume too high. Listening
at very high volume may lead to hearing loss.
• Do not place earphones near a microphone as this may cause
120
120
b
HQ
d
feedback.
E
F
3 5
1 2
c
M
S
L
Playing
e
R
Display in the stereo
1. Press the FOLDER button to choose a folder.
recording mode
2. Press the + or – button to choose the file
120
120
b
HQ
d
E
F
3 5
1 2
c
M
S
e
Display in the monau-
ral recording mode
3. Press the PLAY or OK button to start playback.
4. Press the + or – button to select the proper
5. Press the STOP or OK button at any point
120
120
HQ
E
F
3 5
1 2
M
S
Rec Pause
Forwarding (Fig. 10.2)
Press and hold the button while the
120
recorder is stopped in the file display.
120
HQ
E
F
➥ If you release the button, it will stop. Press
3 5
1 3
M
S
L
R
File length
recorded through the earphone. If the earphone is connected, no
sound will come from the speaker.
(Fig. 10.1)
Every time the FOLDER button is pressed,
folders will switch.
that you want to play. In the list display, use
the + and – buttons to place the cursor on
the desired file. Press the button in the
list display to change the screen to the file
display. In the file display, press the or
button to select a file. If you want to
return from the file display to the list display,
press the FOLDER button.
The record/play indicator light glows green.
Play position bar indicator, Current
playback time, File length
You can change the playing speed by
pressing the PLAY button while the recorder
is playing back ( + P. 84).
sound volume. The display shows the volume
level. You can choose between 0 and 30.
Volume level meter
you want to stop the playback. Stop a file
play back at any point. Press the PLAY or
OK button to start playing back from where
it was stopped. Press and hold the STOP
button while this recorder is in stop mode to
display the remaining memory.
the PLAY or OK button to start playing back
from where it was stopped.
01 /12
0
WS330001.WMA/ 5
WS330002.WMA
WS330003.WMA
WS330004.WMA
03 /12
0
WS330001.WMA
WS330002.WMA
WS330003.WMA/ 5
WS330004.WMA
List display
03
1
20
HQ
0 0
0 0
M
S
22
41
M
S
File display
03
1
20
HQ
a
0 5
1 0
M
S
b
22
41
M
S
c
03
120
HQ
1 5
Volume Level
d
Time & Date
10 : 38
1
7
07
A
M
D
Y
M
R e m a i n
6 8
5 6
0 2
H
M
S
1 . 9
G B
03
120
HQ
0 2
0 5
M
S
22
41
a
M
S
EN
9
Werbung
