Parameter Groups; Configuration - Hitachi Abb Rvt Installation Und Betriebsanleitung

Lock switch status
Bank Settings
Communication Lock
Note: The RVT returns automatically to AUTO mode when the touch screen is not pressed for more than five minutes.
5.4.

Parameter Groups

5.4.1.

Configuration

5.4.1.1. Universal
These are the different groups with their size, type and assigned group IDs:
Group ID Description
0x0000 Real-time Clock
0x0001 Modbus Data
0x0002 Ethernet Data
0x0004 Touch screen Calibration Data
0x0013 Backlight Settings
0x0014 Input Information
5.4.1.2. Access Protected
These are the different groups with their size, type and assigned group IDs:
Group ID Description
0x0100 Event Logging L1-L2
0x0101 Event Logging L2-L3
0x0102 Event Logging L3-L1
0x0103 Event Logging Total
0x0104 Event Logging Temperature
0x0105 Energy
0x0106 Installation Settings 2
0x0107 Status information
0x0109 Alarm Logging
5.4.1.3. RVT specific
These are the different groups with their size, type and assigned group IDs:
Group ID Description
0x0801 Bank Settings
0x0802 I/O
0x0803 Protection (Alarm Relay no 1)
0x0804 Warning (Alarm Relay no 2)
STATUS
Approved
0x0014 0 : Lock switch pushed
0x0802 1 : Bank Settings are locked
0x0809 1 : Communication lock
Size (in bytes)
6
5
21
17
1
5
Size (in bytes)
88
88
88
158
160
80
48
146
36
Size (in bytes)
25
5
62
61
SECURITY LEVEL
Public
1 : Lock switch released
0 : Bank Settings are unlocked
0 : Communication unlocked
Modbus Base address
40000
40100
31700
40400
41900
31400
Modbus Base Address
30000
30100
30200
30300
30400
42000
42100
42200
42300
Modbus Base Address
42800
42900
43000
43100
DOCUMENT ID
9AKK106713A9758
RVT CO MM UNI CATI O N
REV. LANG. PAGE
K en 24/71
© 2022 Hitachi Energy. All rights reserved.