Bosch Rexroth MTX 15VRS Inbetriebnahmeanleitung Seite 333

MTX 15VRS Inbetriebnahme
120 DIM OUT1$(130) : DIM NR$(2)
130 NR$=TRIM$(STR$(P1%))
140 Remove OUT1$=TRIM$(SD.SysTool[1].PreTool.SKQ+" from tool cabinet position:"+NR$+"
150 SETWARN(OUT1$)
N10 M0
160 WAIT
170 CLRWARN()
1000 GOTO .NOCOM
; -----------------------------------------------
; Program name: TCHPOST
; Version: 2.0.0.0
; Task : Trailer
; Note:
; Is not executed
; if no follow-on tool is programmed
; or
; if the tool is already in the spindle.
; Name: JK
; TCH Version: 2.0.0.0
; Application: Manually operated tool changer milling machine 2 sectors
; Date: 01/10/14
; -----------------------------------------------
1010 .NOCOM
SET2 Fräsen AUTOMATIK ohne
Bewegungen
1000 GOTO .NOCOM
; -----------------------------------------------
; Program name: TCHPOST
; Version: 2.0.0.0
; Task : Trailer
; Note:
; Is not executed
; if no follow-on tool is programmed
; or
; if the tool is already in the spindle.
; Name: JK
; TCH Version: 2.0.0.0
; Application: Manually operated tool changer milling machine 2 sectors
; Date: 01/10/14
; -----------------------------------------------
1010 .NOCOM
1000 GOTO .NOCOM
; -----------------------------------------------
; Program name: TCHPLACE
; Version: 2.0.0.0
; task: Place tool:
; Steps variables:
; - Bring place to put tool down to transfer position P1%=MAGPLACE%
; - XY Pre-positioning
; - Move in Y
; - Clamp tool magazine
; - Release tool spindle
; - Retract Z
; - Move out Y if follow on tool SD.TCH.EXTERNAL.TOOL_FOL=FALSE
; Name: JK
; TCH Version: 2.0.0.0
; Application: Simulator milling machine 2 sectors
; date: 01/10/14
; -----------------------------------------------
1010 .NOCOM
1020 DUMMY%=P1%
1000 GOTO .NOCOM
; -----------------------------------------------
; Program name: TCHPICK
; Version: 2.0.0.0
; task: Pick tool:
; steps variables:
Nachspann
Vorspann
Werkzeug Ablegen
Werkzeug Aufnehmen
Steuerung Inbetriebnahme
and clamp in spindle")
R911393280_Ausgabe 03 Bosch Rexroth AG
327/587