Charger Identifi Cation Plate; Description Charger Identifi Cation Plate; Hand Piece Serial Number; Description Hand Piece Serial Number - Heraeus translux power blue Gebrauchsanweisung

Recommended separation distances between portable and mobile RF communica-
tions equipment and the Translux Power Blue
The Translux Power Blue is intended for use in an electromagnetic environment in which
radiated RF disturbances are controlled. The customer or the user of the Translux Power Blue
can help prevent electromagnetic interference by maintaining a minimum distance between
portable and mobile RF communications equipment (transmitters) and the Translux Power Blue
as recommended below, according to the maximum output power of the communications
equipment.
Rated maximum Separation distance according to frequency of transmitter (m)
output power of
150 kHz to 80 MHz
transmitter (W ( ( ) W W
d = 1.2 √P
0.01 0.12
0.1 0.38
1 1.2
10 3.8
100 12
For transmitters rated at a maximum output power not listed above, the recommended separa-
tion distance (d) in metres (m) can be estimated using the equation applicable to the frequency
of the transmitter, where (P) is the maximum output power rating of the transmitter in watts (W
according to the transmitter manufacturer.
Notes:
(1) At 80 MHz and 800 MHz the separation distance for the higher frequency range applies.
(2) These guidelines may not apply in all situations. Electromagnetic propagation is aff ected by
absorption and refl ection from structures, objects and people.
11.2 Charger identifi cation plate
11.2.1 Description charger identifi cation plate
1 CE mark
2 Caution symbol
Read Operating Instructions
3 Symbol for application part type "B"
4 Symbol for WEEE disposal
5 Symbol for unit in class II,
protective insulation
11.3

Hand piece serial number

11.3.1

Description hand piece serial number

1 Engraved serial number
80 MHz to 800 MHz
d = 1.2 √P
0.12
0.38
1.2
3.8
12
1 2
Translux x
®
Power Blue
800 MHz to 2.5 GHz
d = 2.3 √P
0.23
0.73
2.3
7.3
23
( ( ) W W
3 4 5
®
GB
- 29 -